Chemico Lapping Paste — Double Pack - Water Based Paste
Chemico Lapping Paste — Double Pack - Water Based Paste
Water-based, especially formulated for backlapping of mowing machinery blades. Special double pack contains a 500 gm tub of medium 120 grit water-based lapping paste and a 500 gm tub of coarse 80 grit water-based lapping paste.
The Chemico Lapping Paste special double pack contains a 500 gm tub of medium 120 grit water-based lapping paste and a 500 gm tub of coarse 80 grit water-based lapping paste, especially formulated for back lapping of mower and cutter blades.
A range of high-performance, water-based lapping pastes, incorporating a unique gel system that enhances the sharpening characteristics of silicon carbide grit. Depending on the degree of wear and type of equipment, the correct grade is available from fine to coarse. An extremely stable, easy-to-use paste having low environmental impact which does not require cleaning after use. Developed for the maintenance departments of golf courses, municipal organisations, schools and sporting venues.
What's in the pack
| Tub | Grade | Grit (FEPA) | Net Weight |
| 1 | Coarse | F80 | 500 gm |
| 2 | Medium | F120 | 500 gm |
Single packs in Coarse (F80), Medium (F120), and Fine (F220) are also available. Chemico Lapping Paste - High Performance - Water Based
Key Features:
-
- Oil-Free
- Low odour
- Easily to use
- Improves Cutting Performance
- Cohesive gel provides faster sharpening
- Suitable for most types of equipment
- Low-fling formula, which penetrates to the sharpening surfaces
- Non-drying, rewettable formula; rinses with water even after standing
- Resists slumping
- Prevents corrosion on newly sharpened blades
Application and Storage
Adjust cutting edges to be level and within 1 mm of each other and coat blades with compound using a swab or brush. This can be done whilst the blades are running in reverse lapping gear, but obvious safety precautions should be taken. The selection of coarse, medium or fine will depend upon the type of equipment and degree of sharpening needed. Run the machine without cutting grass for up to 1 minute and re-apply if necessary. Readjust blades accordingly. Store between 0 and 35 degrees. C. Store in tightly closed containers. Protect from frost.
Range |
Description |
| 80 Grit | (Coarse) for the maintenance of gang mowers and rough sharpening of low cutters. |
| 120 Grit | (Medium) for fine finishing of large mowers and maintenance of low cutters |
| 220 Grit | (Fine) for ultra-fine finishing of ornamental cutters |
ALSO AVAILABLE IN SINGLE PACKS
Minimum order quantities apply. Contact us for wholesale pricing.
Share
